Phyllotaxis
the spirals are counted, not admired
Concept

Axis translation — where it appears

How far a coiled shell's whorls move along the coiling axis for each turn, the number that turns a flat coil into a spire. It enters whether successive whorls touch only through one angle seen from the apex, and an aperture's height divides it before anything else sees it.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

Also named here as spire — the same set of essays touches all of them, so they are one junction rather than several.

The site's hero shell comes free at a translation of 1.1066, and a slower one at 10.49. Setting the located boundary to zero and solving leaves T_free = √W/(W−1), drawn here across the whole expansion range on logarithmic axes. Above the curve the shell is free at every distance from its axis and the contact region has left the plane rather than merely shrunk in it; a slowly expanding shell at an expansion of 1.1 needs 10.4881 turns of translation to buy that and one expanding twentyfold needs 0.2354. The tower is what buys a shell the right to coil close to its own axis, and the faster it expands the less tower it takes.

What a spire buys

Translation along the coiling axis enters the contact boundary as its square, so a shell that has only just begun to walk along its axis has not moved the boundary at all. It is also strictly one-way, and it has a threshold above which no distance from the axis whatever puts the whorls in touch.

shells · Morphospace An axial section of a spire at W = 2.4, D = 0.3, T = 1, with the angle that decides contact. The discs where the plane holding the axis cuts three whorls, on both sides of the axis. Every disc subtends the same half-angle from the apex, γ = 17.065°, about the line of the disc centres at β = 33.024° from the axis, so the envelope's apical angle is 100.178° whatever the expansion. Whorls with that angle touch below W = 1.8307, and at 2.4 they run free. Successive discs on one side are 2.4 times farther from the apex, and one disc gives back D = 0.3000 and T = 1.0000.

One angle decides contact

Seen from the apex of its coiling axis, every whorl of Raup's shell subtends the same half-angle, and two whorls touch exactly when the sine of that angle exceeds (W − 1)/(W + 1) — with no disagreement against the drawn discs at 400,000 random shells. Two of the three numbers enter only through the angle and the third only through the threshold, which decides which picture of a shell can answer the question: a spire's outline carries no W, a plan carries no T, and an axial section carries all three.

shells · Morphospace An ellipse twice as tall as it is wide at W = 2.4, T = 0.5, beside a circle at T = 0.25. Each panel is an opening, in colour, and the same opening one whorl on, 2.4 times larger about the apex, drawn at the axis distance where the two just meet. An ellipse twice as tall as it is wide at a translation of 0.5 meets at D = 0.391257; a circle at a translation of 0.25 meets at D = 0.391257, the same number, because stretching the axis by 1/2 turns the ellipse into the circle and 0.5 into 0.25.

The fourth number divides the third

Every boundary on Raup's cube was located for a circular opening, and three essays ended on the same hedge: the numbers would move with a differently shaped aperture by an amount nothing had measured. Measured on the drawn outlines of eleven openings, the boundary with no translation does not move at all for any convex opening symmetric about the plane of coiling; an ellipse's height divides the translation and does nothing else; the square law in the translation belongs to a round tip; and a turned opening frees ground only in the D a plan reads.

shells · Morphospace

Named alongside it

The objects these essays reach for when they reach for this one.

Honest limitsModel scopeMorphospaceSpireWhorlClaim testingClosed formGrowth factorParameter spaceTangencyBisectionEvolute

All concepts