Generator

handover-map

One row per rung of the two branches, drawn from its coarse end to its fine one on a logarithmic axis. The mark on each row is the rise at which the two contact steps change places — the rung's handover — and the shaded stretch is the band around it over which the settled divergence holds still. six of the eight rungs have a handover and every one of those sits between 6 and 40 per cent of the way down its rung, never past the middle. The two rungs without one are the coarsest on each branch, whose crossing is above the range this ladder reaches.

Where the two contact steps change places, on every rung. One row per rung of the two branches, drawn from its coarse end to its fine one on a logarithmic axis. The mark on each row is the rise at which the two contact steps change places — the rung's handover — and the shaded stretch is the band around it over which the settled divergence holds still. six of the eight rungs have a handover and every one of those sits between 6 and 40 per cent of the way down its rung, never past the middle. The two rungs without one are the coarsest on each branch, whose crossing is above the range this ladder reaches.

Drawn at its defaults, in every handover, and the band around it. It takes no options at all, so every essay calling it gets this exact drawing.

Called by 5 essays

the blast radius of changing it

Stems and cones

The last of three quantities

The pair, the divergence and the step ordering move together when the rise is swept, and for four rounds no result could be attributed to any of them. Two designs later, two are ruled out as sufficient and the third has never been held still — because holding it is what a rung already does.

Stems and cones

Four crossings nobody visited

Six rungs of the ladder carry a handover and two of them had a band built on them. The other four are here: 70, 126, 16 and 124 rises wide, found by sweeping at a ratio rather than at a fixed step in the rise, which is why the fine ones had been stepped over.

Stems and cones

A band that moves nothing

One of the six bands holds the counted pair, holds the divergence, and does not move the ordering: its two contact steps stay within four parts in a thousand of each other across the whole of it, so the ordering changes hands three times and neither end has one worth the name.

Stems and cones

How wide a band should be

A band ends where the divergence has slid a twentieth of a degree, so its width should follow from how fast the divergence slides. Predicted from the rung's slope that is wrong by factors of 0.20 to 5.92; predicted from a stationary point it is 0.41 to 1.08, and the outlier is the rung that has no stationary point.

Stems and cones

The ordering on six bands

A hundred and fourteen wrecked cuts across four bands, and at every offset of every one of them the family left standing is the same immediately above the handover and immediately below it. Where the answer does change — on the widest band, at three offsets — it changes somewhere else.

All 227 generators